CF 741

Tenons and slots

Large dimensioned and designed for maximum load bearing capacity, the aluminium format sliding table “hovers” on the “X-Roll”, a highly developed guiding technology. The X shape (“X-Roll”) design of the rollers distributes the load optimally on all sides. The linear surface of the steel rollers running on the hardened and ground guiding surface guarantees unbeatable precision and smoothness. “X-Roll” will guarantee you the quality and precision that you expect from your new tilting spindle moulder. Another reason to choose Felder: 10 year factory guarantee to underline the reliability of “X-Roll”.

Silent-POWER®

Exclusive for planer/thicknessers from the Felder Group. The Silent-POWER® spiral cutterblock reduces noise emissions by more than half when planing. The continuous pulling cut ensures tear-free results when planing all types of wood. With this revolutionary new development from Format-4 you are obtaining all of the advantages of a spiral cutterblock at considerably lower operating, investment and adjustment costs. The advantages of the Silent-POWER® cutterblock at a glance ...

• Extremely quiet, noise is reduced by half
• Usable blade life twenty times longer than standard blades
• Four highly precise cutting edges on each knife
• Optimised chip extraction and reduced chip volume
• Tear-free planing results
• Reduced power consumption when compared to similar systems

Change the blades in record time

Simple blade settings, carried out incredibly quick - accurate to a tenth of a millimetre, standard with FELDER! Resin free locking screws and the self-setting knives make it possible to change the blade in less than 2 minutes. Time consuming adjustments and purchasing of expensive setting gauges are a thing of the past. The advantages at a glance ...

• Quick and effortless knife change
• Self-setting blades for high precision when changing the blades
• No resin buildup on the clamping bolts.
• Quiet operation thanks to enclosed design
• Excellent durability of knife edges

Pneumatic workpiece holder

Crosscut fence

The crosscut fence 1100 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position. The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value. The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.

Precision guiding system

The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder guarantee and offers amazing operating smoothness and is completely maintenance free. The 'x' design of the position of the roller bearings ensures that they move smoothly along hardened guides.

“Easy-Glide” - 6 year guarantee!

The patented tilt segment “Easy-Glide” fulfills the highest requirements in businesses and industries. A precise, guided, doublesided support, guarantees maximum load bearing and tolerance free tilting and is absolutely maintenance free. A special, highly durable synthetic material situated in the guide of the tilting segment ensures extremely smooth movement and long-lasting precision. The tilting guide system, a synthetic material tried and tested in aerospace and lock construction, works without the requirement of lubrication and is totally resistant to dust. With a 6 year factory guarantee this Felder component offers reliabilty for many years to come.

Saw unit «104»

The FELDER saw unit “104” Manufactured entirely from cast iron, the new Felder “104” saw unit fulfils the highest demands of modern woodworking.

“Power-Drive” (Saw blade)

Similarly, the saw blade height and angle settings can be set to an accuracy of a tenth of a millimetre. For fine tuning there is also a push button and a clear LED display screen to show you the actual current value.

Quick-change spindle ­system

The spindle quick-change system will provide you with almost limitless possibilities of use. You can use spindles with pre-mounted tools for series production, or use spindles with a different diameter. The spindle can be changed in seconds. A particular highlight is the ability to mount a high speed router spindle with 15,000 rpm capability. For maximum stability and durability the Format-4 spindle has been designed with 3 high quality “precision type” bearings!

Spindle moulder unit «700»

The Felder 700 Series spindle aggregate sets standards that are unparalleled.

Power-Drive (Moulder spindle)

The fully electrical “Power-Drive” control offers exact adjustment and repeat accuracy. The saw blade height and the angle settings can be adjusted at the turn of a knob, the fine setting adjustments are carried out to tenth of a millimetre accuracy using a push button. Red LED digits display the current position in real time on the control panel.

Extensible Support

Aluminium table extension with P-coupling “Single lever” clamping system: fast and simple assembly without tools

Scoring unit

For chip free cutting of laminated panels. The saw blade can be mechanically or electrically driven and can be set in both height and lateral position.

Circular saw shaft

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect ­transmission of power to the saw blade.

To use a grooving cutter “Dado cutter”

The Felder 700 Series saw unit is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.

Remote ON switch on sliding table

For a convenient option we can equip your Felder 700 Series machine with start buttons for the main and scoring blades.

Stop scale

The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value.

Dual extraction for the spindle function

The dual extraction system from the spindle unit and fence ensures that the machine stays clean and dust free.

Height adjustment of the thicknesser table

Thicknessing accuracy to one tenth of a millimeter with the use of the handwheel and its integrated digital display. Max. Thicknessing height 230 mm.

Dust extraction hood

Heavy chip loads are no problem for the chip extraction hood due to its efficient design and large dimension.

Adjusting the depth of cut

The chip removal can be adjusted continuously to up to 4 mm. The magnifying glass guarantees accurate reading of the scale.

The horizontal mortiser

The horizontal mortiser is mounted on the planer side. An optional ­dowelling device can be added to increase the mortiser capability.

Safety bar guides

The safety bar guides are great for end-grain work (optional).

Table opening: 230 mm

The large table opening allows for maximum operator safety. For large dimension tooling, as used for tenoning and panel raising, the cutterblock can be conveniently positioned below the table.

Stability for high performance

The solid cast iron cutterblock housing is built for heavy duty work. The serrated steel infeed roller and the micro-serrated steel outfeed roller guarantee a perfect transport of the workpiece through the machine. Both steel rollers are large dimensioned and non-wearing. If desired we can equip your AD 941 with a rubber infeed roller. This allows workpieces of varying thicknesses to be processed at the same time, equalling out any differences in thickness. The combination of cutterblock, transport rollers and wood type is decisive for perfect planing resuts. The new Felder AD 941 can be individually configured and specified to meet your exact requirements.

2-stage gear

Simple choice for the power feeder speeds of 6 m/min. and 12 m/min.

Planer guard EURO ”Standard“

The space saving planer guard is integrated into the machine chassis which stabilises the workpiece when planing and bevelling.

EGL 1350

OUTSTANDING! The patented double mitre gauge from Felder allows for mitre cuts on pieces of differing widths and at any angle. Really easy to use: simply type in the desired angle as well as the widths of your workpieces on the keyboard. Immediately, you will receive the settings and can set the electronic double mitre gauge accordingly. The fence stop on the fence can be adjusted up to 1350 mm with the scale. Regardless of the angles set, the length compensating vernier scale allows you to compensate for the workpiece length.

Power feeder

The use of a power feeder ensures that standard work when moulding can be carried out cleanly and precisely

Tilting bracket

The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any time with no difficulties.

The Felder planer fence

The planer fence may be tilted to any angle between 90° and 45°. End stops are placed at 90° and 45°.

Rip fence

The rip fence is easy and smooth to adjust, with a single-handed clamping mechanism. The optional fine adjustment makes precise measurements possible. The rip scale is easy to read and perfectly integrated into the machine table.

Open planer table

Quickest ever conversion from planer to thicknesser by simultaneously lifting the spring-assisted planer tables

Multi fine adjustment system

“230” spindle fence for max. tooling diameter 230 mm, MULTI adjustment system for spindle fence “230” enabling parallel alignment and quick setup

Quick change spindle system

Advantages of the Felder spindle quick change system: